SAFETY INSTRUCTIONS
The following safety instructions contain important information concerning the security, use and maintenance of all MOTORVAC® equipment. It is strongly recommended that anyone owning or operating MOTORVAC® equipment should carefully read the following safety tips before use.
 WARNING!
| MOTORVAC® equipment is suggested for use with MOTORVAC® fluid only. Competing engine flush systems use chemical products that may damage seals, filters, and hoses in your MOTORVAC® CarbonClean1000. Use of ANY OTHER PRODUCTS in the MOTORVAC® machine: (a) may result in serious bodily harm, and (b) will void warranty immediately. |
The MOTORVAC® CarbonClean1000 should be serviced serviced only by qualified technicians and according to MOTORVAC® guidelines.
|
IT IS VERY IMPORTANT TO NOTE THE FOLLOWING:
|
-
Wear safety glasses while working on the fuel supply circuit.
-
Consult a specialized manual or the vehicle’s maintenance manual for the testing procedures, as recommended by the manufacturer’s specifications. (e.g.: fuel pressure)
-
Properly clean the fuel supply circuit connections before loosening them.
-
Roll a rag around the connections while hooking up and unhooking the hoses to avoid fuel accumulation.
-
Be sure work area is well ventilated when working with the fuel line.
-
The fuel lines are very fragile. During disconnection, handle with care and use the proper tools.
-
On more recent vehicles, auto-blocking connections are used to facilitate the connection of fuel hoses. It is very important to make sure that all the hoses are well connected.
-
The MOTORVAC® treatment is a complement to the vehicle’s regular tune-up. It is therefore important that the condition of the tune-up be satisfactory (e.g.: broken or loose fuel line, ignition wires, battery cables, electrical wires and fuses must be in good order).
-
After performing the MOTORVAC® treatment and/or the diagnostic of the fuel line circuit, carefully wipe all excess liquid from the equipment or returning from the fuel line.
-
Have access to a fire extinguisher in case of emergency.
-
Keep MOTORVAC® consumable fluids in a safe place at room temperature.
|
IMPORTANT:
-
Never smoke while working on the fuel line or with MOTORVAC®.
-
Never work on the fuel line or with MOTORVAC® near an open flame or sparks, including: furnace, hot water reservoir, damaged spark plug wires, etc.
-
Never allow fuel or MOTORVAC® fluid to spill on hot engine parts. If a leak occurs, stop any electrical contact and clean immediately.
|
